三网合一加MPLS配置实例

大家看看,砍不懂不要问我,请教高手!呵呵:-)
hxga-rt-1#sh run
Building configuration...

Current configuration : 8247 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname hxga-rt-1
!
enable secret 5 $1$TJPE$rfRAoWFHEgXux9NegxTe7/
!
voice-card 1
!
ip subnet-zero
!
!
ip domain-name gong'an.net
!
!
ip vrf fy
rd 100:3
route-target export 100:3
route-target import 100:3
!
ip vrf ga
rd 100:1
route-target export 100:1
route-target import 100:1
!
ip vrf jc
rd 100:4
route-target export 100:4
route-target import 100:4
!
ip vrf video
rd 100:2
route-target export 100:2
route-target import 100:2
ip cef
!
!
voice class codec 88
codec preference 1 g729br8 bytes 50
codec preference 3 g729r8 bytes 50
codec preference 5 g723ar53
codec preference 6 g723ar63 bytes 144
codec preference 7 g723r53
codec preference 8 g723r63 bytes 120
!
!
!
!
!
!
fax interface-type fax-mail
mta receive maximum-recipients 0
!
controller E1 0/0
channel-group 0 timeslots 1-31
description hxga to qhgat 2M
!
controller E1 0/1
channel-group 0 timeslots 1-31
description hxga to hxfy 2M
!
controller E1 0/2
channel-group 0 timeslots 1-31
description hxga to hxjc 2M
!
controller E1 1/0
framing NO-CRC4
ds0-group 0 timeslots 1-15 type r2-digital r2-compelled ani
ds0-group 1 timeslots 17-31 type r2-digital r2-compelled ani
cas-custom 0
unused-abcd 0 1 1 1
country china use-defaults
answer-signal group-b 1
cas-custom 1
unused-abcd 0 1 1 1
country china use-defaults
answer-signal group-b 1
!
!
!
!
interface Loopback0
description hxga-rt-1-id
ip address 10.192.151.6 255.255.255.255
h323-gateway voip interface
h323-gateway voip id gong'an ipaddr 10.192.151.2 1719
h323-gateway voip h323-id hxga-rt-1
h323-gateway voip tech-prefix 1#
!
interface FastEthernet0/0
description hxga lan
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.2
encapsulation dot1Q 2
ip vrf forwarding ga
ip address 10.194.121.100 255.255.255.0
!
interface FastEthernet0/0.3
description hxga video
encapsulation dot1Q 3
ip vrf forwarding video
ip address 10.192.2.65 255.255.255.240
!
interface Serial0/0:0
ip address 10.192.16.22 255.255.255.252
tag-switching ip
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
!
interface FastEthernet0/1.1
encapsulation dot1Q 3
ip address 10.194.237.9 255.255.255.252
!
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip vrf forwarding ga
ip address 10.194.237.21 255.255.255.252
!
interface Serial0/1:0
no ip address
encapsulation frame-relay
!
interface Serial0/1:0.1 point-to-point
ip address 10.194.237.1 255.255.255.252
frame-relay interface-dlci 23
!
interface Serial0/1:0.2 point-to-point
ip vrf forwarding fy
ip address 10.194.237.13 255.255.255.252
frame-relay interface-dlci 24
!
interface Serial0/2:0
no ip address
encapsulation frame-relay
!
interface Serial0/2:0.1 point-to-point
ip address 10.194.237.5 255.255.255.252
tag-switching ip
frame-relay interface-dlci 25
!
interface Serial0/2:0.2 point-to-point
ip vrf forwarding jc
ip address 10.194.237.17 255.255.255.252
frame-relay interface-dlci 26
!
router ospf 1
log-adjacency-changes
network 10.192.16.22 0.0.0.0 area 0
network 10.192.151.6 0.0.0.0 area 0
network 10.194.237.1 0.0.0.0 area 4
network 10.194.237.5 0.0.0.0 area 4
network 10.194.237.9 0.0.0.0 area 4
!
router ospf 2 vrf ga
log-adjacency-changes
redistribute bgp 1 metric-type 1 subnets
network 10.194.121.100 0.0.0.0 area 0
network 10.194.237.21 0.0.0.0 area 0
!
router ospf 3 vrf fy
log-adjacency-changes
redistribute bgp 1 metric-type 1 subnets
network 10.194.237.13 0.0.0.0 area 0
!
router ospf 4 vrf jc
log-adjacency-changes
redistribute bgp 1 metric-type 1 subnets
network 10.194.237.17 0.0.0.0 area 0
!
router ospf 5 vrf video
log-adjacency-changes
redistribute bgp 1 metric-type 1 subnets
network 10.192.2.65 0.0.0.0 area 0
!
router bgp 1
no synchronization
bgp log-neighbor-changes
neighbor 10.192.151.1 remote-as 1
neighbor 10.192.151.1 update-source Loopback0
no auto-summary
!
address-family ipv4 vrf video
redistribute connected
no auto-summary
no synchronization
exit-address-family
!
address-family ipv4 vrf jc
redistribute connected
redistribute ospf 4
no auto-summary
no synchronization
exit-address-family
!
address-family ipv4 vrf ga
redistribute connected
redistribute ospf 2
no auto-summary
no synchronization
exit-address-family
!
address-family ipv4 vrf fy
redistribute connected
redistribute ospf 3
no auto-summary
no synchronization
exit-address-family
!
address-family vpnv4
neighbor 10.192.151.1 activate
neighbor 10.192.151.1 next-hop-self
neighbor 10.192.151.1 send-community both
no auto-summary
exit-address-family
!
ip classless
ip http server
ip pim bidir-enable
!
!
!
!
call rsvp-sync
!
voice-port 1/0:0
cptone CN
!
voice-port 1/0:1
cptone CN
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
dial-peer voice 80000 pots
incoming called-number .T
direct-inward-dial
port 1/0:0
!
dial-peer voice 80001 pots
destination-pattern 9463T
port 1/0:1
!
dial-peer voice 80002 voip
destination-pattern 9462T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80003 voip
destination-pattern 9463T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80004 voip
destination-pattern 9464T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80005 voip
destination-pattern 9465T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80006 voip
destination-pattern 9466T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80007 voip
destination-pattern 9467T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80008 voip
destination-pattern 9468T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80009 voip
destination-pattern 9471T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80010 voip
destination-pattern 9472T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80011 voip
destination-pattern 9473T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80012 voip
destination-pattern 9474T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80013 voip
destination-pattern 9475T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80014 voip
destination-pattern 9476T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80015 voip
destination-pattern 9477T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80016 voip
destination-pattern 9478T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80017 voip
destination-pattern 9479T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80018 voip
destination-pattern 9111T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80019 voip
destination-pattern 9461T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
dial-peer voice 80020 voip
destination-pattern 6666T
voice-class codec 88
session target ras
dtmf-relay cisco-rtp h245-signal h245-alphanumeric
fax rate 9600
!
gateway
!
!
line con 0
line aux 0
line vty 0 4
password
login
!
!
end

hxga-rt-1#

文章录入：csh    责任编辑：csh

赞 (0)

相关推荐

  • 三网合一加MPLS配置实例

    大家看看,砍不懂不要问我,请教高手!呵呵:-) hxga-rt-1#sh run Building configuration... Current configuration : 8247 bytes ! version 12.2 service timestamps debug uptime service timestamps log uptimeno service password-encryption ! hostname hxga-rt-1 ! enable secret 5 $1

  • log4j.properties 配置(实例讲解)

    1.需要的jar如下: !-- log4j --> <dependency> <groupId>log4j</groupId> <artifactId>log4j</artifactId> <version>1.2.17</version> </dependency> <dependency> <groupId>org.slf4j</groupId> <artif

  • web.xml中如何设置配置文件的加载路径实例详解

    web.xml中如何设置配置文件的加载路径实例详解 web应用程序通过Tomcat等容器启动时,会首先加载web.xml文件,通常我们工程中的各种配置文件,如日志.数据库.spring的文件等都在此时被加载,下面是两种常用的配置文件加载路径,即配置文件可以放到 SRC目录下或者可以放到WEB-INF根目录下 第一种在web.xml中这样配置: <context-param> <param-name >contextConfigLocation </param-name >

  • Nginx 多站点配置实例详解

    Nginx 多站点配置实例详解 在一台 VPS 上,我们有时候需要同时跑几个 virtualenv.比如 virtualenv app1 跑的是 Django 的一个应用,而 virtualenv app2 跑的是 Tornado.那么如何配置 Nginx,让它同时支持这两个 virtualenv 的运行呢? 首先是 Nginx 的主配置,位于 etc/nginx/ngnix.conf,让它保持默认就行: user nginx; worker_processes 1; error_log /va

  • SpringBoot配置文件的加载位置实例详解

    springboot采纳了建立生产就绪spring应用程序的观点. Spring Boot优先于配置的惯例,旨在让您尽快启动和运行.在一般情况下,我们不需要做太多的配置就能够让spring boot正常运行.在一些特殊的情况下,我们需要做修改一些配置,或者需要有自己的配置属性. SpringBoot启动会扫描以下位置的application.yml或者 application.properties文件作为SpringBoot的默认配置文件. -file:./config/    -file:./

  • Django加载配置的过程详解

    目录 一. Django服务启动 manage.py 二. 引入配置 三. 加载配置 一. Django服务启动 manage.py os.environ.setdefault("DJANGO_SETTINGS_MODULE", "ui.settings") 设置配置文件环境变量- #!/usr/bin/env python import os import sys if __name__ == "__main__": os.environ.se

  • Python pkg_resources模块动态加载插件实例分析

    Python pkg_resources模块动态加载插件实例分析

    使用标准库importlib的import_module()函数.django的import_string(),它们都可以动态加载指定的 Python 模块. 举两个动态加载例子: 举例一: 在你项目中有个test函数,位于your_project/demo/test.py中,那么你可以使用import_module来动态加载并调用这个函数而不需要在使用的地方通过import导入. module_path = 'your_project/demo' module = import_module(

  • mui上拉加载功能实例详解

    最近在做移动端的项目,用到了mui的上拉加载,整理如下: 1.需要引入的css.js <link rel="stylesheet" href="common/mui/css/mui.min.css" rel="external nofollow" > <script src="js/jquery-3.2.0.min.js"></script> <script src="com

  • spring boot application properties配置实例代码详解

    废话不多说了,直接给大家贴代码了,具体代码如下所示: # =================================================================== # COMMON SPRING BOOT PROPERTIES # # This sample file is provided as a guideline. Do NOT copy it in its # entirety to your own application. ^^^ # ========

  • ThinkPHP 在阿里云上的nginx.config配置实例详解

    具体代码如下所示: # For more information on configuration, see: # * Official English Documentation: http://nginx.org/en/docs/ # * Official Russian Documentation: http://nginx.org/ru/docs/ user nginx; worker_processes auto; error_log /var/log/nginx/error.log;

随机推荐