C++实现LeetCode(61.旋转链表)

[LeetCode] 61. Rotate List 旋转链表

Given the head of a linked list, rotate the list to the right by k places.

Example 1:

Input: head = [1,2,3,4,5], k = 2
Output: [4,5,1,2,3]

Example 2:

Input: head = [0,1,2], k = 4
Output: [2,0,1]

Constraints:

  • The number of nodes in the list is in the range [0, 500].
  • -100 <= Node.val <= 100
  • 0 <= k <= 2 * 109

这道旋转链表的题和之前那道 Rotate Array 很类似，但是比那道要难一些，因为链表的值不能通过下表来访问，只能一个一个的走，博主刚开始拿到这题首先想到的就是用快慢指针来解，快指针先走k步，然后两个指针一起走，当快指针走到末尾时，慢指针的下一个位置是新的顺序的头结点，这样就可以旋转链表了，自信满满的写完程序，放到 OJ 上跑，以为能一次通过，结果跪在了各种特殊情况，首先一个就是当原链表为空时，直接返回NULL，还有就是当k大于链表长度和k远远大于链表长度时该如何处理，需要首先遍历一遍原链表得到链表长度n，然后k对n取余，这样k肯定小于n，就可以用上面的算法了，代码如下:

 解法一：

class Solution {
public:
    ListNode *rotateRight(ListNode *head, int k) {
        if (!head) return NULL;
        int n = 0;
        ListNode *cur = head;
        while (cur) {
            ++n;
            cur = cur->next;
        }
        k %= n;
        ListNode *fast = head, *slow = head;
        for (int i = 0; i < k; ++i) {
            if (fast) fast = fast->next;
        }
        if (!fast) return head;
        while (fast->next) {
            fast = fast->next;
            slow = slow->next;
        }
        fast->next = head;
        fast = slow->next;
        slow->next = NULL;
        return fast;
    }
};

这道题还有一种解法，跟上面的方法类似，但是不用快慢指针，一个指针就够了，原理是先遍历整个链表获得链表长度n，然后此时把链表头和尾链接起来，在往后走 n - k%n 个节点就到达新链表的头结点前一个点，这时断开链表即可，代码如下:

class Solution {
public:
    ListNode *rotateRight(ListNode *head, int k) {
        if (!head) return NULL;
        int n = 1;
        ListNode *cur = head;
        while (cur->next) {
            ++n;
            cur = cur->next;
        }
        cur->next = head;
        int m = n - k % n;
        for (int i = 0; i < m; ++i) {
            cur = cur->next;
        }
        ListNode *newhead = cur->next;
        cur->next = NULL;
        return newhead;
    }
};

到此这篇关于C++实现LeetCode(61.旋转链表)的文章就介绍到这了,更多相关C++实现旋转链表内容请搜索我们以前的文章或继续浏览下面的相关文章希望大家以后多多支持我们！

赞 (0)

相关推荐

  • C++实现LeetCode(58.求末尾单词的长度)

    [LeetCode] 58. Length of Last Word 求末尾单词的长度 Given a string s consists of upper/lower-case alphabets and empty space characters ' ', return the length of last word in the string. If the last word does not exist, return 0. Note: A word is defined as a

  • C++实现LeetCode(56.合并区间)

    [LeetCode] 56. Merge Intervals 合并区间 Given a collection of intervals, merge all overlapping intervals. Example 1: Input: [[1,3],[2,6],[8,10],[15,18]] Output: [[1,6],[8,10],[15,18]] Explanation: Since intervals [1,3] and [2,6] overlaps, merge them into

  • C++实现LeetCode(60.序列排序)

    [LeetCode] 60. Permutation Sequence 序列排序 The set [1,2,3,...,n] contains a total of n! unique permutations. By listing and labeling all of the permutations in order, we get the following sequence for n = 3: "123" "132" "213" &

  • C++实现LeetCode(59.螺旋矩阵之二)

    [LeetCode] 59. Spiral Matrix II 螺旋矩阵之二 Given a positive integer n, generate a square matrix filled with elements from 1 to n2 in spiral order. Example: Input: 3 Output: [ [ 1, 2, 3 ], [ 8, 9, 4 ], [ 7, 6, 5 ] ] 此题跟之前那道 Spiral Matrix 本质上没什么区别,就相当于个类似逆

  • C++实现LeetCode(57.插入区间)

    [LeetCode] 57. Insert Interval 插入区间 Given a set of non-overlapping intervals, insert a new interval into the intervals (merge if necessary). You may assume that the intervals were initially sorted according to their start times. Example 1: Input: int

  • C++实现LeetCode(189.旋转数组)

    [LeetCode] 189. Rotate Array 旋转数组 Given an array, rotate the array to the right by k steps, where k is non-negative. Example 1: Input: [1,2,3,4,5,6,7] and k = 3 Output: [5,6,7,1,2,3,4] Explanation: rotate 1 steps to the right: [7,1,2,3,4,5,6] rotate

  • C++实现LeetCode(61.旋转链表)

    C++实现LeetCode(61.旋转链表)

    [LeetCode] 61. Rotate List 旋转链表 Given the head of a linked list, rotate the list to the right by k places. Example 1: Input: head = [1,2,3,4,5], k = 2 Output: [4,5,1,2,3] Example 2: Input: head = [0,1,2], k = 4 Output: [2,0,1] Constraints: The number

  • Python 数据结构之旋转链表

    题目描述:给定一个链表,旋转链表,使得每个节点向右移动k个位置,其中k是一个非负数 样例:给出链表1->2->3->4->5->null和k=2:返回4->5->1->2->3->null 首先,观察一下这个题目要达到的目的,其实,换一种说法,可以这样来描述:给出一个k值,将链表从倒数第k个节点处起之后的部分移动到链表前面,就样例来说,其实是将4->5这一部分移动到整个链表前面,变成4->5->1->2->3->

  • C语言数据结构旋转链表的实现

    C语言数据结构旋转链表的实现 实例: 给出链表1->2->3->4->5->null和k=2 返回4->5->1->2->3->null 分析: 感觉很直观,直接把分割点找出来就行,记得k可能大于len,要取模 代码: /** * Definition for singly-linked list. * struct ListNode { * int val; * ListNode *next; * ListNode(int x) : val(x

  • C++实现LeetCode(86.划分链表)

    [LeetCode] 86.Partition List 划分链表 Given a linked list and a value x, partition it such that all nodes less than x come before nodes greater than or equal to x. You should preserve the original relative order of the nodes in each of the two partitions

  • C++实现LeetCode(141.单链表中的环)

    C++实现LeetCode(141.单链表中的环)

    [LeetCode] 141. Linked List Cycle 单链表中的环 Given a linked list, determine if it has a cycle in it. To represent a cycle in the given linked list, we use an integer pos which represents the position (0-indexed) in the linked list where tail connects to.

  • C++实现LeetCode(142.单链表中的环之二)

    C++实现LeetCode(142.单链表中的环之二)

    [LeetCode] 142. Linked List Cycle II 单链表中的环之二 Given a linked list, return the node where the cycle begins. If there is no cycle, return null. To represent a cycle in the given linked list, we use an integer pos which represents the position (0-indexe

  • C++实现LeetCode(237.删除链表的节点)

    [LeetCode] 237.Delete Node in a Linked List 删除链表的节点 Write a function to delete a node (except the tail) in a singly linked list, given only access to that node. Supposed the linked list is 1 -> 2 -> 3 -> 4 and you are given the third node with va

  • 详解Redis中的双链表结构

    Redis中双链表实现的基本结构: 1.节点结构 typedef struct listNode { struct listNode *prev; //前向节点 struct listNode *next; //后向节点 void *value; //该节点的值 } listNode; 2.双向链表结构 typedef struct list { listNode *head; //头节点 listNode *tail; //尾节点 void *(*dup)(void *ptr); //复制函数

  • 使用python实现链表操作

    使用python实现链表操作

    一.概念梳理 链表是计算机科学里面应用应用最广泛的数据结构之一.它是最简单的数据结构之一,同时也是比较高阶的数据结构(例如棧.环形缓冲和队列) 简单的说,一个列表就是单数据通过索引集合在一起.在C里面这叫做指针.比方说,一个数据元素可以由地址元素,地理元素.路由信息活着交易细节等等组成.但是链表里面的元素类型都是一样的,是一种特殊的列表. 一个单独的列表元素叫做一个节点.这些节点不像数组一样都按顺序存储在内存当中,相反,你可以通过一个节点指向另外一个节点的指针在内存不同的地方找到这些元素.列表最

随机推荐