Cat 6509 NAT 实例
6509 NAT 示例
Console> (enable) show config all
begin
!
# ***** ALL (DEFAULT and NON-DEFAULT) CONFIGURATION *****
!
!
#time: Sun Oct 21 2001, 21:36:49
!
#version 6.2(2)
!
set password $2$FMFQ$HfZR5DUszVHIRhrz4h6V70
set enablepass $2$FMFQ$HfZR5DUszVHIRhrz4h6V70
set prompt Console>
set length 24 default
set logout 20
set config mode binary
set banner motd ^C^C
!
#test
set test diaglevel minimal
!
#errordetection
set errordetection inband disable
set errordetection memory disable
set errordetection portcounter enable
!
#system
set system baud 9600
set system modem disable
set system name
set system location
set system contact
set system countrycode
set traffic monitor 100
set system highavailability disable
set system highavailability versioning disable
set system core-dump disable
set system core-file slot0:crashinfo
set feature log-command enable
set feature supmon enable
!
#power
set power redundancy enable
!
#frame distribution method
set port channel all distribution ip both
!
#mac address reduction
set spantree macreduction disable
!
#default portcost mode
set spantree defaultcostmode short
!
#snmp
set snmp community read-only public
set snmp community read-write private
set snmp community read-write-all secret
set snmp rmon disable
set snmp rmonmemory 85
set snmp trap disable module
set snmp trap disable chassis
set snmp trap disable bridge
set snmp trap disable repeater
set snmp trap disable vtp
set snmp trap disable auth
set snmp trap disable ippermit
set snmp trap disable vmps
set snmp trap disable entity
set snmp trap disable config
set snmp trap disable stpx
set snmp trap disable syslog
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
!
#tacacs+
set tacacs attempts 3
set tacacs directedrequest disable
set tacacs timeout 5
!
#radius
set radius deadtime 0
set radius timeout 5
set radius retransmit 2
!
#kerberos
!
#authentication
set authentication login tacacs disable console
set authentication login tacacs disable telnet
set authentication login tacacs disable http
set authentication enable tacacs disable console
set authentication enable tacacs disable telnet
set authentication enable tacacs disable http
set authentication login radius disable console
set authentication login radius disable telnet
set authentication login radius disable http
set authentication enable radius disable console
set authentication enable radius disable telnet
set authentication enable radius disable http
set authentication login local enable console
set authentication login local enable telnet
set authentication login local enable http
set authentication enable local enable console
set authentication enable local enable telnet
set authentication enable local enable http
set authentication login kerberos disable console
set authentication login kerberos disable telnet
set authentication login kerberos disable http
set authentication enable kerberos disable console
set authentication enable kerberos disable telnet
set authentication enable kerberos disable http
set authentication login attempt 3 console
set authentication login attempt 3 telnet
set authentication login lockout 0 console
set authentication login lockout 0 telnet
set authentication enable attempt 3 console
set authentication enable attempt 3 telnet
set authentication enable lockout 0 console
set authentication enable lockout 0 telnet
!
#stp mode
set spantree mode pvst+
!
#vtp
set vtp domain hbu
set vtp mode server
set vtp v2 disable
set vtp pruning disable
set vtp pruneeligible 2-1000
clear vtp pruning 1001-1005
set vlan 1 name default type ethernet mtu 1500 said 100001 state active
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
set vlan 99 name wh type ethernet mtu 1500 said 100099 state active
set vlan 101 name xinzhongxin type ethernet mtu 1500 said 100101 state active
set vlan 102 name laozhongxin type ethernet mtu 1500 said 100102 state active
set vlan 103 name chukou type ethernet mtu 1500 said 100103 state active
set vlan 510 name 02x type ethernet mtu 1500 said 100510 state active
set vlan 511 name 02d type ethernet mtu 1500 said 100511 state active
set vlan 512 name 04x type ethernet mtu 1500 said 100512 state active
set vlan 513 name 06x type ethernet mtu 1500 said 100513 state active
set vlan 514 name 06d type ethernet mtu 1500 said 100514 state active
set vlan 515 name 09x type ethernet mtu 1500 said 100515 state active
set vlan 516 name 09d type ethernet mtu 1500 said 100516 state active
set vlan 517 name 12x type ethernet mtu 1500 said 100517 state active
set vlan 518 name 12d type ethernet mtu 1500 said 100518 state active
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state acti
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active s
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state act
set dot1q-all-tagged disable
!
#ip
set feature mdg enable
set feature psync-recovery no-powerdown
set interface sc0 1 10.186.240.100/255.0.0.0 10.255.255.255
set interface sc0 up
set interface sl0 0.0.0.0 0.0.0.0
set interface sl0 up
set arp agingtime 1200
set ip redirect enable
set ip unreachable enable
set ip fragmentation enable
set ip alias default 0.0.0.0
!
#command alias
!
#vmps
set vmps server retry 3
set vmps server reconfirminterval 60
set vmps downloadmethod tftp
set vmps downloadserver 0.0.0.0 vmps-config-database.1
set vmps state disable
!
#rcp
set rcp username
!
#dns
set ip dns disable
!
#spantree
#uplinkfast groups
set spantree uplinkfast disable
#backbonefast
set spantree backbonefast disable
#portfast
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
set spantree portfast bpdu-guard disable
set spantree portfast bpdu-filter disable
#bpdu-skewing
set spantree bpdu-skewing disable
#vlan 1003
set spantree enable 1003
set spantree fwddelay 4 1003
set spantree hello 2 1003
set spantree maxage 10 1003
set spantree priority 32768 1003
#vlan 1005
set spantree enable 1005
set spantree fwddelay 4 1005
set spantree hello 2 1005
set spantree maxage 10 1005
set spantree priority 32768 1005
#vlan(defaults)
set spantree enable 1,99,101-103,510-518
set spantree fwddelay 15 1,99,101-103,510-518
set spantree hello 2 1,99,101-103,510-518
set spantree maxage 20 1,99,101-103,510-518
set spantree priority 32768 1,99,101-103,510-518
!
#syslog
set logging console enable
set logging telnet enable
set logging server disable
set logging level cdp 4 default
set logging level mcast 2 default
set logging level dtp 5 default
set logging level earl 2 default
set logging level ip 2 default
set logging level pruning 2 default
set logging level snmp 2 default
set logging level spantree 2 default
set logging level sys 5 default
set logging level tac 2 default
set logging level tcp 2 default
set logging level telnet 2 default
set logging level tftp 2 default
set logging level vtp 2 default
set logging level vmps 2 default
set logging level kernel 2 default
set logging level filesys 2 default
set logging level pagp 5 default
set logging level mgmt 5 default
set logging level mls 5 default
set logging level protfilt 2 default
set logging level security 2 default
set logging level radius 2 default
set logging level udld 4 default
set logging level gvrp 2 default
set logging level cops 3 default
set logging level qos 3 default
set logging level acl 5 default
set logging level rsvp 3 default
set logging level ld 3 default
set logging level privatevlan 3 default
set logging server facility LOCAL7
set logging server severity 4
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
set logging timestamp enable
set logging buffer 500
set logging history 1
!
#ntp
set ntp broadcastclient disable
set ntp broadcastdelay 3000
set ntp client disable
set ntp authentication disable
clear timezone
set summertime disable
set summertime recurring
!
#set boot command
set boot config-register 0x2
set boot config-register auto-config overwrite
set boot config-register auto-config sync disable
set boot system flash bootflash:cat6000-sup.6-2-2.bin
set config acl nvram
!
#permit list
set ip permit disable telnet
set ip permit disable ssh
set ip permit disable snmp
!
#permanent arp entries
!
#igmp
set igmp disable
set igmp fastleave disable
!
#rgmp
set rgmp disable
!
#protocolfilter
set protocolfilter disable
!
#mls
set mls flow destination
set mls nde version 7
set mls agingtime 256
set mls agingtime ipx 256
set mls agingtime fast 0 0
set mls nde disable
!
#vlan mapping
!
#gmrp
set gmrp disable
!
#garp
set garp timer all 200 600 10000
!
#cdp
set cdp interval 60
set cdp holdtime 180
set cdp enable
set cdp version v2
!
#dot1x
set dot1x system-auth-control enable
set dot1x quiet-period 60
set dot1x tx-period 30
set dot1x supptimeout 30
set dot1x servertimeout 30
set dot1x maxreq 2
set dot1x re-authperiod 3600
set dot1x re-authentication disable
!
#qos
set qos disable
set qos drop-threshold 1q4t rx queue 1 50 60 80 100
set qos map 2q2t tx 1 1 cos 0
set qos map 2q2t tx 1 1 cos 1
set qos map 2q2t tx 1 2 cos 2
set qos map 2q2t tx 1 2 cos 3
set qos map 2q2t tx 2 1 cos 4
set qos map 2q2t tx 2 1 cos 5
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
set qos map 2q2t tx 2 2 cos 6
set qos map 2q2t tx 2 2 cos 7
set qos drop-threshold 2q2t tx queue 1 80 100
set qos drop-threshold 2q2t tx queue 2 80 100
set qos wrr 2q2t 5 255
set qos txq-ratio 2q2t 80 20
set qos map 1p1q4t rx 1 1 cos 0
set qos map 1p1q4t rx 1 1 cos 1
set qos map 1p1q4t rx 1 2 cos 2
set qos map 1p1q4t rx 1 2 cos 3
set qos map 1p1q4t rx 1 3 cos 4
set qos map 1p1q4t rx 2 1 cos 5
set qos map 1p1q4t rx 1 3 cos 6
set qos map 1p1q4t rx 1 4 cos 7
set qos drop-threshold 1p1q4t rx queue 1 50 60 80 100
set qos map 1p2q2t tx 1 1 cos 0
set qos map 1p2q2t tx 1 1 cos 1
set qos map 1p2q2t tx 1 2 cos 2
set qos map 1p2q2t tx 1 2 cos 3
set qos map 1p2q2t tx 2 1 cos 4
set qos map 1p2q2t tx 3 1 cos 5
set qos map 1p2q2t tx 2 1 cos 6
set qos map 1p2q2t tx 2 2 cos 7
set qos wrr 1p2q2t 5 255
set qos txq-ratio 1p2q2t 70 15 15
set qos wred 1p2q2t tx queue 1 40:70 70:100
set qos wred 1p2q2t tx queue 2 40:70 70:100
set qos map 1p3q1t tx 1 1 cos 0
set qos map 1p3q1t tx 1 1 cos 1
set qos map 1p3q1t tx 2 1 cos 2
set qos map 1p3q1t tx 2 1 cos 3
set qos map 1p3q1t tx 2 1 cos 4
set qos map 1p3q1t tx 4 1 cos 5
set qos map 1p3q1t tx 3 1 cos 6
set qos map 1p3q1t tx 3 1 cos 7
set qos wrr 1p3q1t 100 150 200
set qos wred 1p3q1t tx queue 1 70:100
set qos wred 1p3q1t tx queue 2 70:100
set qos wred 1p3q1t tx queue 3 70:100
set qos map 1p1q0t rx 1 cos 0
set qos map 1p1q0t rx 1 cos 1
set qos map 1p1q0t rx 1 cos 2
set qos map 1p1q0t rx 1 cos 3
set qos map 1p1q0t rx 1 cos 4
set qos map 1p1q0t rx 2 cos 5
set qos map 1p1q0t rx 1 cos 6
set qos map 1p1q0t rx 1 cos 7
set qos rxq-ratio 1p1q0t 80 20
set qos map 1p2q1t tx 1 1 cos 0
set qos map 1p2q1t tx 1 1 cos 1
set qos map 1p2q1t tx 2 1 cos 2
set qos map 1p2q1t tx 2 1 cos 3
set qos map 1p2q1t tx 1 1 cos 4
set qos map 1p2q1t tx 3 1 cos 5
set qos map 1p2q1t tx 2 1 cos 6
set qos map 1p2q1t tx 1 1 cos 7
set qos wrr 1p2q1t 5 255
set qos txq-ratio 1p2q1t 70 15 15
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
set qos wred 1p2q1t tx queue 1 0:100
set qos wred 1p2q1t tx queue 2 0:100
set qos rxq-ratio 1p1q8t 80 20
set qos wred 1p1q8t rx queue 1 0:100 0:100 0:100 0:100 0:100 0:100 0:100 0:100
set qos bridged-microflow-policing disable 1-1000,1025-4094
set qos cos-dscp-map 0 8 16 24 32 40 48 56
set qos ipprec-dscp-map 0 8 16 24 32 40 48 56
set qos dscp-cos-map 0-7:0
set qos dscp-cos-map 8-15:1
set qos dscp-cos-map 16-23:2
set qos dscp-cos-map 24-31:3
set qos dscp-cos-map 32-39:4
set qos dscp-cos-map 40-47:5
set qos dscp-cos-map 48-55:6
set qos dscp-cos-map 56-63:7
set qos policed-dscp-map 0:0
set qos policed-dscp-map 1:1
set qos policed-dscp-map 2:2
set qos policed-dscp-map 3:3
set qos policed-dscp-map 4:4
set qos policed-dscp-map 5:5
set qos policed-dscp-map 6:6
set qos policed-dscp-map 7:7
set qos policed-dscp-map 8:8
set qos policed-dscp-map 9:9
set qos policed-dscp-map 10:10
set qos policed-dscp-map 11:11
set qos policed-dscp-map 12:12
set qos policed-dscp-map 13:13
set qos policed-dscp-map 14:14
set qos policed-dscp-map 15:15
set qos policed-dscp-map 16:16
set qos policed-dscp-map 17:17
set qos policed-dscp-map 18:18
set qos policed-dscp-map 19:19
set qos policed-dscp-map 20:20
set qos policed-dscp-map 21:21
set qos policed-dscp-map 22:22
set qos policed-dscp-map 23:23
set qos policed-dscp-map 24:24
set qos policed-dscp-map 25:25
set qos policed-dscp-map 26:26
set qos policed-dscp-map 27:27
set qos policed-dscp-map 28:28
set qos policed-dscp-map 29:29
set qos policed-dscp-map 30:30
set qos policed-dscp-map 31:31
set qos policed-dscp-map 32:32
set qos policed-dscp-map 33:33
set qos policed-dscp-map 34:34
set qos policed-dscp-map 35:35
set qos policed-dscp-map 36:36
set qos policed-dscp-map 37:37
set qos policed-dscp-map 38:38
set qos policed-dscp-map 39:39
set qos policed-dscp-map 40:40
set qos policed-dscp-map 41:41
set qos policed-dscp-map 42:42
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
set qos policed-dscp-map 43:43
set qos policed-dscp-map 44:44
set qos policed-dscp-map 45:45
set qos policed-dscp-map 46:46
set qos policed-dscp-map 47:47
set qos policed-dscp-map 48:48
set qos policed-dscp-map 49:49
set qos policed-dscp-map 50:50
set qos policed-dscp-map 51:51
set qos policed-dscp-map 52:52
set qos policed-dscp-map 53:53
set qos policed-dscp-map 54:54
set qos policed-dscp-map 55:55
set qos policed-dscp-map 56:56
set qos policed-dscp-map 57:57
set qos policed-dscp-map 58:58
set qos policed-dscp-map 59:59
set qos policed-dscp-map 60:60
set qos policed-dscp-map 61:61
set qos policed-dscp-map 62:62
set qos policed-dscp-map 63:63
set qos acl default-action ip dscp 0
set qos acl default-action ipx dscp 0
set qos acl default-action mac dscp 0
set qos policy-source local
set qos rsvp disable
set qos rsvp policy-timeout 30
set qos rsvp local-policy forward
!
#cops
set cops retry-interval 30 30 300
!
#udld
set udld disable
set udld interval 15
!
#port channel
set port channel 1/1-2 25
set port channel 2/1-4 26
set port channel 2/5-8 27
set port channel 3/1-4 28
set port channel 3/5-8 29
!
#security ACLs
!
#accounting
set accounting exec disable
set accounting connect disable
set accounting system disable
set accounting commands disable
set accounting suppress null-username disable
set accounting update new-info
!
#errdisable timeout
set errdisable-timeout disable other
set errdisable-timeout disable udld
set errdisable-timeout disable duplex-mismatch
set errdisable-timeout disable bpdu-guard
set errdisable-timeout disable channel-misconfig
set errdisable-timeout interval 300
!
#http configuration
set ip http server disable
set ip http port 80
!
#private vlans
!
#crypto key
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
!
#qos statistics data export
set qos statistics export disable
set qos statistics export interval 300
set qos statistics export destination 0.0.0.0 0
!
# default port status is enable
!
!
#module 1 : 2-port 1000BaseX Supervisor
set module name 1
set vlan 101 1/2
set vlan 102 1/1
set port enable 1/1-2
set port trap 1/1-2 disable
set port name 1/1 laozhongxin
set port name 1/2 xinzhongxin
set port dot1x 1/1-2 port-control force-authorized
set port dot1x 1/1-2 multiple-host disable
set port security 1/1-2 disable age 0 maximum 1 shutdown 0 violation shutdown
set port broadcast 1/1-2 100.00% multicast disable unicast disable
set port membership 1/1-2 static
set port protocol 1/1-2 ip on
set port protocol 1/1-2 ipx auto
set port protocol 1/1-2 group auto
set port negotiation 1/1-2 enable
set port flowcontrol 1/1-2 send desired
set port flowcontrol 1/1-2 receive off
set cdp enable 1/1-2
set udld enable 1/1-2
set udld aggressive-mode disable 1/1-2
set trunk 1/1 auto negotiate 1-1005,1025-4094
set trunk 1/2 auto negotiate 1-1005,1025-4094
set spantree portfast 1/1-2 disable
set spantree portcost 1/1-2 4
set spantree portpri 1/1-2 32
set spantree portvlanpri 1/1 0
set spantree portvlanpri 1/2 0
set spantree portvlancost 1/1 cost 3
set spantree portvlancost 1/2 cost 3
set spantree guard none 1/1-2
set port qos 1/1-2 cos 0
set port qos 1/1-2 trust untrusted
set port qos 1/1-2 port-based
set port qos 1/1-2 policy-source cops
set port rsvp 1/1-2 dsbm-election disable 128
set port gvrp 1/1-2 disable
set gvrp registration normal 1/1-2
set gvrp applicant normal 1/1-2
set port gmrp 1/1-2 enable
set gmrp registration normal 1/1-2
set gmrp fwdall disable 1/1-2
set port channel 1/1-2 mode auto silent
set port jumbo 1/1-2 disable
set port dot1qtunnel 1/1-2 disable
set qos statistics export port 1/1 disable
set qos statistics export port 1/2 disable
!
#module 2 : 8-port 1000BaseX Ethernet
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
set module name 2
set module enable 2
set vlan 1 2/4
set vlan 510 2/1
set vlan 511 2/2
set vlan 512 2/3
set vlan 513 2/5
set vlan 514 2/6
set vlan 515 2/7
set vlan 516 2/8
set port enable 2/1-8
set port trap 2/1-8 disable
set port name 2/1 02x
set port name 2/2 02d
set port name 2/3 04x
set port name 2/5 06x
set port name 2/6 06d
set port name 2/7 09x
set port name 2/8 09d
set port name 2/4
set port dot1x 2/1-8 port-control force-authorized
set port dot1x 2/1-8 multiple-host disable
set port security 2/1-8 disable age 0 maximum 1 shutdown 0 violation shutdown
set port broadcast 2/1-8 100.00% multicast disable unicast disable
set port membership 2/1-8 static
set port protocol 2/1-8 ip on
set port protocol 2/1-8 ipx auto
set port protocol 2/1-8 group auto
set port negotiation 2/1-8 enable
set port flowcontrol 2/1-8 send desired
set port flowcontrol 2/1-8 receive off
set cdp enable 2/1-8
set udld enable 2/1-8
set udld aggressive-mode disable 2/1-8
set trunk 2/1 auto negotiate 1-1005,1025-4094
set trunk 2/2 auto negotiate 1-1005,1025-4094
set trunk 2/3 off dot1q 1-1005,1025-4094
set trunk 2/4 auto negotiate 1-1005,1025-4094
set trunk 2/5 auto negotiate 1-1005,1025-4094
set trunk 2/6 auto negotiate 1-1005,1025-4094
set trunk 2/7 auto dot1q 1-1005,1025-4094
set trunk 2/8 auto negotiate 1-1005,1025-4094
set spantree portfast 2/1-8 disable
set spantree portcost 2/1-8 4
set spantree portpri 2/1-8 32
set spantree portvlanpri 2/1 0
set spantree portvlanpri 2/2 0
set spantree portvlanpri 2/3 0
set spantree portvlanpri 2/4 0
set spantree portvlanpri 2/5 0
set spantree portvlanpri 2/6 0
set spantree portvlanpri 2/7 0
set spantree portvlanpri 2/8 0
set spantree portvlancost 2/1 cost 3
set spantree portvlancost 2/2 cost 3
set spantree portvlancost 2/3 cost 3
set spantree portvlancost 2/4 cost 3
set spantree portvlancost 2/5 cost 3
set spantree portvlancost 2/6 cost 3
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
set spantree portvlancost 2/7 cost 3
set spantree portvlancost 2/8 cost 3
set spantree guard none 2/1-8
set port qos 2/1-8 cos 0
set port qos 2/1-8 trust untrusted
set port qos 2/1-8 port-based
set port qos 2/1-8 policy-source cops
set port rsvp 2/1-8 dsbm-election disable 128
set port gvrp 2/1-8 disable
set gvrp registration normal 2/1-8
set gvrp applicant normal 2/1-8
set port gmrp 2/1-8 enable
set gmrp registration normal 2/1-8
set gmrp fwdall disable 2/1-8
set port channel 2/1-8 mode auto silent
set port jumbo 2/1-8 disable
set port dot1qtunnel 2/1-8 disable
set qos statistics export port 2/1 disable
set qos statistics export port 2/2 disable
set qos statistics export port 2/3 disable
set qos statistics export port 2/4 disable
set qos statistics export port 2/5 disable
set qos statistics export port 2/6 disable
set qos statistics export port 2/7 disable
set qos statistics export port 2/8 disable
!
#module 3 : 8-port 1000BaseX Ethernet
set module name 3
set module enable 3
set vlan 1 3/3-6
set vlan 101 3/7-8
set vlan 517 3/1
set vlan 518 3/2
set port enable 3/1-8
set port trap 3/1-8 disable
set port name 3/1 12x
set port name 3/2 12d
set port name 3/7 fuwu1
set port name 3/8 fuwu2
set port name 3/3-6
set port dot1x 3/1-8 port-control force-authorized
set port dot1x 3/1-8 multiple-host disable
set port security 3/1-8 disable age 0 maximum 1 shutdown 0 violation shutdown
set port broadcast 3/1-8 100.00% multicast disable unicast disable
set port membership 3/1-8 static
set port protocol 3/1-8 ip on
set port protocol 3/1-8 ipx auto
set port protocol 3/1-8 group auto
set port negotiation 3/1-8 enable
set port flowcontrol 3/1-8 send desired
set port flowcontrol 3/1-8 receive off
set cdp enable 3/1-8
set udld enable 3/1-2
set udld aggressive-mode disable 3/1-8
set trunk 3/1 auto negotiate 1-1005,1025-4094
set trunk 3/2 auto negotiate 1-1005,1025-4094
set trunk 3/3 auto negotiate 1-1005,1025-4094
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
set trunk 3/4 auto negotiate 1-1005,1025-4094
set trunk 3/5 auto negotiate 1-1005,1025-4094
set trunk 3/6 auto negotiate 1-1005,1025-4094
set trunk 3/7 auto negotiate 1-1005,1025-4094
set trunk 3/8 auto negotiate 1-1005,1025-4094
set spantree portfast 3/1-8 disable
set spantree portcost 3/1-8 4
set spantree portpri 3/1-8 32
set spantree portvlanpri 3/1 0
set spantree portvlanpri 3/2 0
set spantree portvlanpri 3/3 0
set spantree portvlanpri 3/4 0
set spantree portvlanpri 3/5 0
set spantree portvlanpri 3/6 0
set spantree portvlanpri 3/7 0
set spantree portvlanpri 3/8 0
set spantree portvlancost 3/1 cost 3
set spantree portvlancost 3/2 cost 3
set spantree portvlancost 3/3 cost 3
set spantree portvlancost 3/4 cost 3
set spantree portvlancost 3/5 cost 3
set spantree portvlancost 3/6 cost 3
set spantree portvlancost 3/7 cost 3
set spantree portvlancost 3/8 cost 3
set spantree guard none 3/1-8
set port qos 3/1-8 cos 0
set port qos 3/1-8 trust untrusted
set port qos 3/1-8 port-based
set port qos 3/1-8 policy-source cops
set port rsvp 3/1-8 dsbm-election disable 128
set port gvrp 3/1-8 disable
set gvrp registration normal 3/1-8
set gvrp applicant normal 3/1-8
set port gmrp 3/1-8 enable
set gmrp registration normal 3/1-8
set gmrp fwdall disable 3/1-8
set port channel 3/1-8 mode auto silent
set port jumbo 3/1-8 disable
set port dot1qtunnel 3/1-8 disable
set qos statistics export port 3/1 disable
set qos statistics export port 3/2 disable
set qos statistics export port 3/3 disable
set qos statistics export port 3/4 disable
set qos statistics export port 3/5 disable
set qos statistics export port 3/6 disable
set qos statistics export port 3/7 disable
set qos statistics export port 3/8 disable
!
#module 4 empty
!
#module 5 empty
!
#module 6 empty
!
#module 15 : 1-port Multilayer Switch Feature Card
set module name 15
set module enable 15
set vlan 1 15/1
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
set port trap 15/1 disable
set port name 15/1
set cdp enable 15/1
set udld disable 15/1
set udld aggressive-mode disable 15/1
set trunk 15/1 nonegotiate isl 1-1005,1025-4094
set spantree portcost 15/1 4
set spantree portpri 15/1 32
set spantree portvlanpri 15/1 0
set spantree portvlancost 15/1 cost 3
set spantree guard none 15/1
set port gmrp 15/1 enable
set gmrp registration normal 15/1
set gmrp fwdall disable 15/1
!
#module 16 empty
!
#switch port analyzer
!
#cam
set cam agingtime 1,99,101-103,510-518,1003,1005 300
!
#gvrp
set gvrp dynamic-vlan-creation disable
set gvrp disable
!
#local director acceleration
set lda disable
!
#authorization
set authorization exec disable console
set authorization exec disable telnet
set authorization enable disable console
set authorization enable disable telnet
set authorization commands disable console
set authorization commands disable telnet
end
三层的例子：
R6500#show run
Building configuration...
Current configuration : 1557 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R6500
!
boot system flash bootflash:c6msfc-psv-mz.121-7a.E1
enable password ××××
!
ip subnet-zero
!
!
no ip finger
!
ip multicast-routing
!
!
!
interface Vlan101
ip address ×××。×××。×××。××× 255.255.255.0 secondary
ip address ×××。×××。××××。××× 255.255.255.0
ip pim sparse-dense-mode
!
interface Vlan102
ip address 10.1.1.1 255.255.255.252 secondary
ip address 10.186.240.253 255.255.255.0
ip pim sparse-dense-mode
!
interface Vlan510
ip address 10.186.128.254 255.255.252.0
ip pim sparse-dense-mode
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] 下一页
文章录入：csh 责任编辑：csh
!
interface Vlan511
ip address 10.186.192.254 255.255.252.0
ip pim sparse-dense-mode
!
interface Vlan512
ip address 10.186.136.254 255.255.252.0
ip pim sparse-dense-mode
!
interface Vlan513
ip address 10.186.144.254 255.255.252.0
ip pim sparse-dense-mode
!
interface Vlan514
ip address 10.186.152.254 255.255.252.0
ip pim sparse-dense-mode
!
interface Vlan515
ip address 10.186.160.254 255.255.252.0
ip pim sparse-dense-mode
!
interface Vlan516
ip address 10.186.204.254 255.255.252.0
ip pim sparse-dense-mode
!
interface Vlan517
ip address 10.186.168.254 255.255.252.0
ip pim sparse-dense-mode
!
interface Vlan518
ip address 10.186.176.254 255.255.252.0
ip pim sparse-dense-mode
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.186.240.252
ip route ×××.×××.0.0 255.255.128.0 10.1.1.2
ip route ×××。×××。×××。××× 255.255.255.0 10.1.1.2
ip http server
!
!
!
line con 0
transport input none
line vty 0 4
password ××××××
login
!
end
上一页 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14]
文章录入：csh 责任编辑：csh
相关推荐
-
Cat 6509 NAT 实例
6509 NAT 示例 Console> (enable) show config all begin ! # ***** ALL (DEFAULT and NON-DEFAULT) CONFIGURATION ***** ! ! #time: Sun Oct 21 2001, 21:36:49 ! #version 6.2(2) ! set password $2$FMFQ$HfZR5DUszVHIRhrz4h6V70 set enablepass $2$FMFQ$HfZR5DUszVHIRh
-
javascript面向对象快速入门实例
本文深入浅出的讲述了javascript面向对象快速入门实例.分享给大家供大家参考.具体如下: javascript面向对象入门案例: 复制代码 代码如下: <script language="javascript" type="text/javascript"> function Cat(){//js中对象的定义与函数一样,不同点在于怎么样调用. } var cat1 = new Cat();//创建类实例 //js中类属性可以动态添加,并不需要写在原
-
Linux命令之mkdir，cat，touch，vi/vim的详解
目录 mkdir命令语法 命令格式 命令功能 命令参数 mkdir命令示例 实例1:创建一个空目录 实例2:递归创建多个目录 实例3:创建权限为777的目录 实例4:创建新目录都显示信息 实例五:一个命令创建项目的目录结构 cat命令语法 命令格式 命令功能 命令参数 cat命令示例 实例一:把 log2012.log 的文件内容加上行号后输入 log2013.log 这个文件里 实例二:把 log2012.log 和 log2013.log 的文件内容加上行号(空白行不加)之后将内容附加到 l
-
第4章 数据处理-php正则表达式-郑阿奇(续)
1.正则表达式基础知识 含义:由普通字符和(a-z)和一些特殊字符组成的字符串模式 功能:有效性验证. 替换文本. 从一个字符串提取一个子字符串. 分类:POSIX和Perl POSIX风格更容易掌握,但不能用于二进制模式,而perl相对比较复杂. 2.POSIX风格的正则表达式 1.编写正则表达式 表4.3 POSIX正则表达式语法格式列表 字 符 描 述 \ 转义字符,用于转义特殊字符.例如,'.'匹配单个字符,'\.'匹配一个点号.'\-'匹配连字符'-','\\'匹配符号'\' ^ 匹配
-
javascript类继承机制的原理分析
目前 javascript的实现继承方式并不是通过"extend"关键字来实现的,而是通过 constructor function和prototype属性来实现继承.首先我们创建一个animal 类 js 代码 复制代码 代码如下: var animal = function (){ //这就是constructor function 了 this .name = 'pipi'; this .age = 10; this .height = 0; } //建立一个动物的实例 var
-
Python中动态获取对象的属性和方法的教程
首先通过一个例子来看一下本文中可能用到的对象和相关概念. #coding: UTF-8 import sys # 模块,sys指向这个模块对象 import inspect def foo(): pass # 函数,foo指向这个函数对象 class Cat(object): # 类,Cat指向这个类对象 def __init__(self, name='kitty'): self.name = name def sayHi(self): # 实例方法,sayHi指向这个方法对象,使用类或实例.
-
java必学必会之static关键字
一.static关键字 原来一个类里面的成员变量,每new一个对象,这个对象就有一份自己的成员变量,因为这些成员变量都不是静态成员变量.对于static成员变量来说,这个成员变量只有一份,而且这一份是这个类所有的对象共享. 1.1.静态成员变量与非静态成员变量的区别 以下面的例子为例说明 package cn.galc.test; public class Cat { /** * 静态成员变量 */ private static int sid = 0; private String name;
-
php 中的closure用法详解
Closure,匿名函数,是php5.3的时候引入的,又称为Anonymous functions.字面意思也就是没有定义名字的函数.比如以下代码(文件名是do.php) <?php function A() { return 100; }; function B(Closure $callback) { return $callback(); } $a = B(A()); print_r($a);//输出:Fatal error: Uncaught TypeError: Argument 1
-
Python中的自省（反射）详解
首先通过一个例子来看一下本文中可能用到的对象和相关概念. 复制代码 代码如下: #coding: UTF-8 import sys # 模块,sys指向这个模块对象 import inspect def foo(): pass # 函数,foo指向这个函数对象 class Cat(object): # 类,Cat指向这个类对象 def __init__(self, name='kitty'): self.name = name def sayHi(s
-
javascript面向对象之对象的深入理解
本文进一步分析讲述了javascript面向对象之对象的深入理解.分享给大家供大家参考.具体分析如下: javacript面向对象程序设计中,可以理解为一切都是对象.实例代码如下: 复制代码 代码如下: <script language="javascript" type="text/javascript"> function Cat(){ } var cat1 = new Cat();//创建类实例 cat1.name = "小狗"