Ubuntu下Docker CE的安装

本文用于记录Ubuntu 17.10下Docker CE的安装。

安装依赖

关于Docker CE版本在Ubuntu下安装有如下限制

64位的OS

需要Ubuntu64bit的OS, 确认方法如下

devops@ubuntu:~$ uname -m
x86_64
devops@ubuntu:~$

版本

支持如下Ubuntu的版本

  • Artful 17.10
  • Xenial 16.04 (LTS)
  • Trusty 14.04 (LTS)

注意：其中Artful 17.10只支持Docker CE17.11 Edge以及以后版本，因为Artful本身也是在2017年10月发行的过渡版本

发行代码的确认方式，比如Artful

devops@ubuntu:~$ lsb_release -cs
artful
devops@ubuntu:~$

硬件

Ubuntu对Docker CE的支持除了需要是64位的OS之外，x86的CPU也是需要的。除了x86之外，还有如下的支持类型

  • armhf
  • s390x（IBM Z）
  • ppc64le （IBM Power）
devops@ubuntu:~$ uname -m
x86_64
devops@ubuntu:~$

安装

apt-get update

使用apt-get update更新源中的软件列表

devops@ubuntu:~$ sudo su
[sudo] password for devops:
root@ubuntu:/home/devops# apt-get update
Hit:1 http://cn.archive.ubuntu.com/ubuntu artful InRelease
Get:2 http://cn.archive.ubuntu.com/ubuntu artful-updates InRelease [78.6 kB]
Hit:3 http://cn.archive.ubuntu.com/ubuntu artful-backports InRelease
Get:4 http://security.ubuntu.com/ubuntu artful-security InRelease [78.6 kB]
Get:5 http://cn.archive.ubuntu.com/ubuntu artful-updates/main i386 Packages [212 kB]
Get:6 http://cn.archive.ubuntu.com/ubuntu artful-updates/main amd64 Packages [216 kB]
Get:7 http://cn.archive.ubuntu.com/ubuntu artful-updates/universe i386 Packages [89.0 kB]
Get:8 http://cn.archive.ubuntu.com/ubuntu artful-updates/universe amd64 Packages [89.9 kB]
Fetched 764 kB in 4s (163 kB/s)
Reading package lists... Done
root@ubuntu:/home/devops#

安装所需的package

命令：apt-get install apt-transport-https ca-certificates curl software-properties-common

执行日志

root@ubuntu:/home/devops# apt-get install apt-transport-https ca-certificates curl software-properties-common
Reading package lists... Done
Building dependency tree
Reading state information... Done
ca-certificates is already the newest version (20170717).
software-properties-common is already the newest version (0.96.24.17).
The following additional packages will be installed:
 libcurl3
The following NEW packages will be installed:
 apt-transport-https
The following packages will be upgraded:
 curl libcurl3
2 upgraded, 1 newly installed, 0 to remove and 53 not upgraded.
Need to get 383 kB of archives.
After this operation, 247 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://cn.archive.ubuntu.com/ubuntu artful-updates/main amd64 apt-transport-https amd64 1.5.1 [34.7 kB]
Get:2 http://cn.archive.ubuntu.com/ubuntu artful-updates/main amd64 curl amd64 7.55.1-1ubuntu2.3 [152 kB]
Get:3 http://cn.archive.ubuntu.com/ubuntu artful-updates/main amd64 libcurl3 amd64 7.55.1-1ubuntu2.3 [196 kB]
Fetched 383 kB in 14s (26.2 kB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
  LANGUAGE = "en_HK:en",
  LC_ALL = (unset),
  LC_CTYPE = "UTF-8",
  LANG = "en_HK.UTF-8"
  are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_HK.UTF-8").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Selecting previously unselected package apt-transport-https.
(Reading database ... 63866 files and directories currently installed.)
Preparing to unpack .../apt-transport-https_1.5.1_amd64.deb ...
Unpacking apt-transport-https (1.5.1) ...
Preparing to unpack .../curl_7.55.1-1ubuntu2.3_amd64.deb ...
Unpacking curl (7.55.1-1ubuntu2.3) over (7.55.1-1ubuntu2.2) ...
Preparing to unpack .../libcurl3_7.55.1-1ubuntu2.3_amd64.deb ...
Unpacking libcurl3:amd64 (7.55.1-1ubuntu2.3) over (7.55.1-1ubuntu2.2) ...
Setting up apt-transport-https (1.5.1) ...
Setting up libcurl3:amd64 (7.55.1-1ubuntu2.3) ...
Processing triggers for libc-bin (2.26-0ubuntu2) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up curl (7.55.1-1ubuntu2.3) ...
root@ubuntu:/home/devops#

添加GPG key

使用如下命令添加docker官方的GPG key，

命令：curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -

执行日志

root@ubuntu:/home/devops# curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
OK
root@ubuntu:/home/devops#

此key的数字签名为9DC8 5822 9FC7 DD38 854A E2D8 8D81 803C 0EBF CD88，所以可以用其最后8位进行确认

root@ubuntu:/home/devops# apt-key fingerprint 0EBFCD88
pub  rsa4096 2017-02-22 [SCEA]
   9DC8 5822 9FC7 DD38 854A E2D8 8D81 803C 0EBF CD88
uid      [ unknown] Docker Release (CE deb) <docker@docker.com>
sub  rsa4096 2017-02-22 [S]
root@ubuntu:/home/devops#

设定stable源仓库

使用如下命令设定x86安装类型的stable源仓库

命令：add-apt-repository “deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable”

如果是其他类型的化，对应关系参看如下，将上述命令中的arch=amd64进行替换即可

执行日志：

root@ubuntu:/home/devops# add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
root@ubuntu:/home/devops#

apt-get update

再次使用apt-get update更新源中的软件列表

root@ubuntu:/home/devops# apt-get update
Hit:1 http://cn.archive.ubuntu.com/ubuntu artful InRelease
Get:2 http://security.ubuntu.com/ubuntu artful-security InRelease [78.6 kB]
Get:3 http://cn.archive.ubuntu.com/ubuntu artful-updates InRelease [78.6 kB]
Hit:4 http://cn.archive.ubuntu.com/ubuntu artful-backports InRelease
Get:5 https://download.docker.com/linux/ubuntu artful InRelease [51.9 kB]
Get:6 https://download.docker.com/linux/ubuntu artful/stable amd64 Packages [1462 B]
Fetched 211 kB in 2s (85.8 kB/s)
Reading package lists... Done
root@ubuntu:/home/devops#

安装docker-ce

root@ubuntu:/home/devops# apt-get install docker-ce
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
 aufs-tools cgroupfs-mount libltdl7
The following NEW packages will be installed:
 aufs-tools cgroupfs-mount docker-ce libltdl7
0 upgraded, 4 newly installed, 0 to remove and 53 not upgraded.
Need to get 29.9 MB of archives.
After this operation, 150 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://cn.archive.ubuntu.com/ubuntu artful-updates/universe amd64 aufs-tools amd64 1:4.1+20161219-1ubuntu0.1 [102 kB]
Get:2 https://download.docker.com/linux/ubuntu artful/stable amd64 docker-ce amd64 17.12.1~ce-0~ubuntu [29.8 MB]
Get:3 http://cn.archive.ubuntu.com/ubuntu artful/universe amd64 cgroupfs-mount all 1.4 [6320 B]
Get:4 http://cn.archive.ubuntu.com/ubuntu artful/main amd64 libltdl7 amd64 2.4.6-2 [38.8 kB]
Fetched 29.9 MB in 8s (3536 kB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
  LANGUAGE = "en_HK:en",
  LC_ALL = (unset),
  LC_CTYPE = "UTF-8",
  LANG = "en_HK.UTF-8"
  are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_HK.UTF-8").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Selecting previously unselected package aufs-tools.
(Reading database ... 63874 files and directories currently installed.)
Preparing to unpack .../aufs-tools_1%3a4.1+20161219-1ubuntu0.1_amd64.deb ...
Unpacking aufs-tools (1:4.1+20161219-1ubuntu0.1) ...
Selecting previously unselected package cgroupfs-mount.
Preparing to unpack .../cgroupfs-mount_1.4_all.deb ...
Unpacking cgroupfs-mount (1.4) ...
Selecting previously unselected package libltdl7:amd64.
Preparing to unpack .../libltdl7_2.4.6-2_amd64.deb ...
Unpacking libltdl7:amd64 (2.4.6-2) ...
Selecting previously unselected package docker-ce.
Preparing to unpack .../docker-ce_17.12.1~ce-0~ubuntu_amd64.deb ...
Unpacking docker-ce (17.12.1~ce-0~ubuntu) ...
Setting up aufs-tools (1:4.1+20161219-1ubuntu0.1) ...
Processing triggers for ureadahead (0.100.0-20) ...
Setting up cgroupfs-mount (1.4) ...
Processing triggers for libc-bin (2.26-0ubuntu2) ...
Processing triggers for systemd (234-2ubuntu12.1) ...
Setting up libltdl7:amd64 (2.4.6-2) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up docker-ce (17.12.1~ce-0~ubuntu) ...
Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /lib/systemd/system/docker.service.
Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /lib/systemd/system/docker.socket.
Processing triggers for ureadahead (0.100.0-20) ...
Processing triggers for libc-bin (2.26-0ubuntu2) ...
Processing triggers for systemd (234-2ubuntu12.1) ...
root@ubuntu:/home/devops#

指定版本安装

如果希望指定版本方式安装，则在安装时需要指定docker-ce=17.12.1~ce-0~ubuntu版本方式即可

root@ubuntu:/home/devops# apt-cache madison docker-ce
 docker-ce | 17.12.1~ce-0~ubuntu | https://download.docker.com/linux/ubuntu artful/stable amd64 Packages
 docker-ce | 17.12.0~ce-0~ubuntu | https://download.docker.com/linux/ubuntu artful/stable amd64 Packages
root@ubuntu:/home/devops#
root@ubuntu:/home/devops# apt-get install docker-ce=17.12.1~ce-0~ubuntu
Reading package lists... Done
Building dependency tree
Reading state information... Done
docker-ce is already the newest version (17.12.1~ce-0~ubuntu).
0 upgraded, 0 newly installed, 0 to remove and 53 not upgraded.
root@ubuntu:/home/devops#

安装后确认

版本确认

root@ubuntu:/home/devops# docker version
Client:
 Version:  17.12.1-ce
 API version:  1.35
 Go version:  go1.9.4
 Git commit:  7390fc6
 Built: Tue Feb 27 22:17:53 2018
 OS/Arch:  linux/amd64
Server:
 Engine:
 Version: 17.12.1-ce
 API version: 1.35 (minimum version 1.12)
 Go version:  go1.9.4
 Git commit:  7390fc6
 Built:  Tue Feb 27 22:16:25 2018
 OS/Arch: linux/amd64
 Experimental: false
root@ubuntu:/home/devops#

整体信息

可以看出很多基本信息，比如存储方式为overlay2

root@ubuntu:/home/devops# docker info
Containers: 0
 Running: 0
 Paused: 0
 Stopped: 0
Images: 0
Server Version: 17.12.1-ce
Storage Driver: overlay2
 Backing Filesystem: extfs
 Supports d_type: true
 Native Overlay Diff: true
Logging Driver: json-file
Cgroup Driver: cgroupfs
Plugins:
 Volume: local
 Network: bridge host macvlan null overlay
 Log: awslogs fluentd gcplogs gelf journald json-file logentries splunk syslog
Swarm: inactive
Runtimes: runc
Default Runtime: runc
Init Binary: docker-init
containerd version: 9b55aab90508bd389d7654c4baf173a981477d55
runc version: 9f9c96235cc97674e935002fc3d78361b696a69e
init version: 949e6fa
Security Options:
 apparmor
 seccomp
 Profile: default
Kernel Version: 4.13.0-21-generic
Operating System: Ubuntu 17.10
OSType: linux
Architecture: x86_64
CPUs: 1
Total Memory: 988.7MiB
Name: ubuntu
ID: TYYA:4LWB:YTHA:2DNB:XBXM:NFNP:ADMY:VZEJ:2ZBN:KPKW:PTML:S5A2
Docker Root Dir: /var/lib/docker
Debug Mode (client): false
Debug Mode (server): false
Registry: https://index.docker.io/v1/
Labels:
Experimental: false
Insecure Registries:
 127.0.0.0/8
Live Restore Enabled: false
WARNING: No swap limit support
root@ubuntu:/home/devops#

参考文献

https://docs.docker.com/install/linux/docker-ce/ubuntu/

总结

以上就是这篇文章的全部内容了，希望本文的内容对大家的学习或者工作具有一定的参考学习价值，谢谢大家对我们的支持。如果你想了解更多相关内容请查看下面相关链接

赞 (0)

相关推荐

  • ubuntu16.04搭建nfs服务的方法

    ubuntu16.04搭建nfs服务的方法

    NFS简介 NFS(Network File System)即网络文件系统,是FreeBSD支持的文件系统中的一种,它允许网络中的计算机之间通过TCP/IP网络共享资源.在NFS的应用中,本地NFS的客户端应用可以透明地读写位于远端NFS服务器上的文件,就像访问本地文件一样. nfs服务是实现Linux和Linux之间的文件共享,nfs服务的搭建比较简单. 现在介绍如何在ubuntu16.04系统中搭建nfs服务,ubuntu的搭建比红帽的还要简单. Ubuntu配置NFS的方法 1.安装nfs

  • 使用命令行检测Ubuntu版本方法

    方法一:使用lsb_release实用程序 lsb_release实用程序可以显示有关Linux发行版的LSB(Linux标准库)信息.它是检查Ubuntu版本的首选方法,无论运行的是哪个桌面环境或Ubuntu版本,此方法都可以使用. 下面我们就来看看如何检测Ubuntu版本: 1.使用Ctrl+Alt+T键盘快捷键或单击终端图标打开终端. 2.使用lsb_release -a命令显示Ubuntu版本,会在Description行看到Ubuntu版本信息 输出: No LSB modules a

  • Ubuntu环境下SSH的安装及使用详解

    SSH是指Secure Shell,是一种安全的传输协议,Ubuntu客户端可以通过SSH访问远程服务器 . SSH的简介和工作机制 SSH简介 传统的网络服务程序,如:ftp.POP和telnet在本质上都是不安全的,因为它们在网络上用明文传送口令和数据,别有用心的人非常容易就可以截获这些口令和数据.而且,这些服务程序的安全验证方式也是有其弱点的,就是很容易受到"中间人"(man-in-the-middle)这种方式的攻击.所谓"中间人"的攻击方式,就是"

  • ubuntu系统修改时区和时间的方法

    ubuntu系统修改时区和时间的方法

    在Linux计算机上,有两个时间,一个是硬件时间(BIOS中记录的时间,称为hwclock),另一个是操作系统时间(osclock).硬件时钟由BIOS电池供电, 当计算机关机后,会继续运行,BIOS电池一般可使用几年,如果没电了,那BIOS中的数据会恢复出厂设置. 硬件时间与操作系统时间的交互流程 1.开机时,操作系统从BIOS中读取硬件时间+时区,然后根据osclock的时区,转换为对应的时间.然后操作系统时间与硬件时间就独立运行,相互不影响,我们 通过应用程序获取的时间用的都是操作系统时间

  • 详解Ubuntu16.04安装Python3.7及其pip3并切换为默认版本

    0.配置依赖环境,如果不进行这步可能会出现一些问题 中间可能有多余空格,去除下再运行,一般都能安装成功,如果不能可以先更新下sudo apt-get update sudo apt-get install zlib1g-dev libbz2-dev libssl-dev libncurses5-dev libsqlite3-dev libreadline-dev tk-dev libgdbm-dev libdb-dev libpcap-dev xz-utils libexpat1-dev lib

  • Ubuntu虚拟机下使用cutecom进行串口通信的方法

    Ubuntu虚拟机下使用cutecom进行串口通信 1. 安装cutecom 使用以下命令安装cutecom sudo apt-get install cutecom 调用以下命令打开cutecom sudo su cutecom 其中,Device位置的如果使用USB转串口,需要手动填写路径/dev/ttyUSB0 2. 为虚拟机添加串口 在虚拟机关闭的状态下,打开虚拟机设置 点击添加按钮 点击下一步即完成串口的添加 3. 为虚拟机创建ttyUSB0端口 使用以下命令创建ttyUSB0端口 s

  • Ubuntu16.04搭建php5.6Web服务器环境

    Ubuntu 16.04默认安装php7.0环境,但是php7目前对某些旧系统的兼容性并不是很好,如果自行安装php5需要清除php7的已安装包,否则会报错. 移除默认及已安装的PHP包 sudo dpkg -l | grep php| awk '{print $2}' |tr "\n" " " sudo apt-get install aptitude sudo aptitude purge `dpkg -l | grep php| awk '{print $2}

  • Ubuntu基础设定:openssh-server的安装和使用介绍

    Ubuntu基础设定:openssh-server的安装和使用介绍

    记录一下Ubuntu17.10的openssh-server的安装和使用.安装之后就可以使用ssh登陆Ubuntu了,所以是Ubuntu的基础设定之一. 事前准备 Ubuntu版本:17.10 devops@ubuntu:~$ cat /etc/issue Ubuntu 17.10 \n \l devops@ubuntu:~$ devops@ubuntu:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu

  • Ubuntu上mysql的安装及使用(通用版)

    Ubuntu上mysql的安装及使用(通用版)

    不管是哪个版本的Ubuntu,安装mysql数据库基本上都是大同小异.下面介绍一下具体的安装步骤: 1.打开终端,并取得root权限 2.在终端输入: apt-get install mysql-server apt-get install mysql-client apt-get install libmysqlclient-dev 安装过程中,必要的地方需要输入"Y"进行确定. 上面这三条命令执行完以后,要想检测mysql是否安装成功,可输入下面的命令进行查看: netstat -

  • ubuntu15.10下hadoop2.7.2的安装与配置详解

    网上和很多书上都有不少的hadoop在linux系统下的安装教程,但是尝试过的读者会发现,就算是按照这些教程一步步的操作,还是会在某个地方出错,主要原因是版本问题.尤其是书上的版本一般都较老,所以并不建议对着书上的教程来操作,但是可以作为参考.下面给出我自己亲身实践的安装过程,尽量把我知道的原理也写出来,这样就算有些步骤出现问题,知道了原因也是很容易解决的,就怕出现问题了,还不知道问题出在哪? 下面的代码都是在ubuntu的命令窗口(terminal)中输入: 1.工具准备: 1.1 更新apt

随机推荐