sqlserver 存储过程分页代码第1/2页

代码如下:

declare @TotalCount int
declare @TotalPageCount int
exec P_viewPage_A 'type1','*','id','','id asc',1,0,4,3,@TotalCount output,@TotalPageCount output

select * from type1

Create PROC P_viewPage_A
/*
nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2007.5.7 QQ:34813284
敬告:适用于单一主键或存在唯一值列的表或视图
ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围
*/
@TableName VARCHAR(200), --表名
@FieldList VARCHAR(2000), --显示列名,如果是全部字段则为*
@PrimaryKey VARCHAR(100), --单一主键或唯一值键
@Where VARCHAR(2000), --查询条件 不含'where'字符,如id>10 and len(userid)>9
@Order VARCHAR(1000), --排序 不含'order by'字符,如id asc,userid desc,必须指定asc或desc
--注意当@SortType=3时生效,记住一定要在最后加上主键,否则会让你比较郁闷
@SortType INT, --排序规则 1:正序asc 2:倒序desc 3:多列排序方法
@RecorderCount INT, --记录总数 0:会返回总记录
@PageSize INT, --每页输出的记录数
@PageIndex INT, --当前页数
@TotalCount INT OUTPUT, --记返回总记录
@TotalPageCount INT OUTPUT --返回总页数
AS
SET NOCOUNT ON
IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0
SET @Order = RTRIM(LTRIM(@Order))
SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey))
SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),' ','')
WHILE CHARINDEX(', ',@Order) > 0 OR CHARINDEX(' ,',@Order) > 0
BEGIN
SET @Order = REPLACE(@Order,', ',',')
SET @Order = REPLACE(@Order,' ,',',')
END
IF ISNULL(@TableName,'') = '' OR ISNULL(@FieldList,'') = ''
OR ISNULL(@PrimaryKey,'') = ''
OR @SortType < 1 OR @SortType >3
OR @RecorderCount < 0 OR @PageSize < 0 OR @PageIndex < 0
BEGIN
PRINT('ERR_00')
RETURN
END
IF @SortType = 3
BEGIN
IF (UPPER(RIGHT(@Order,4))!=' ASC' AND UPPER(RIGHT(@Order,5))!=' DESC')
BEGIN PRINT('ERR_02') RETURN END
END
DECLARE @new_where1 VARCHAR(1000)
DECLARE @new_where2 VARCHAR(1000)
DECLARE @new_order1 VARCHAR(1000)
DECLARE @new_order2 VARCHAR(1000)
DECLARE @new_order3 VARCHAR(1000)
DECLARE @Sql VARCHAR(8000)
DECLARE @SqlCount NVARCHAR(4000)
IF ISNULL(@where,'') = ''
BEGIN
SET @new_where1 = ' '
SET @new_where2 = ' WHERE '
END
ELSE
BEGIN
SET @new_where1 = ' WHERE ' + @where
SET @new_where2 = ' WHERE ' + @where + ' AND '
END
IF ISNULL(@order,'') = '' OR @SortType = 1 OR @SortType = 2
BEGIN
IF @SortType = 1
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' ASC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' DESC'
END
IF @SortType = 2
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' DESC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' ASC'
END
END
ELSE
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
END
IF @SortType = 3 AND CHARINDEX(','+@PrimaryKey+' ',','+@Order)>0
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
SET @new_order2 = @Order + ','
SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},')
SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,')
SET @new_order2 = ' ORDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)
IF @FieldList <> '*'
BEGIN
SET @new_order3 = REPLACE(REPLACE(@Order + ',','ASC,',','),'DESC,',',')
SET @FieldList = ',' + @FieldList
WHILE CHARINDEX(',',@new_order3)>0
BEGIN
IF CHARINDEX(SUBSTRING(','+@new_order3,1,CHARINDEX(',',@new_order3)),','+@FieldList+',')>0
BEGIN
SET @FieldList =
@FieldList + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3))
END
SET @new_order3 =
SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3))
END
SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList))
END
END
SET @SqlCount = 'SELECT @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/'
+ CAST(@PageSize AS VARCHAR)+') FROM ' + @TableName + @new_where1
IF @RecorderCount = 0
BEGIN
EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT',
@TotalCount OUTPUT,@TotalPageCount OUTPUT
END
ELSE
BEGIN
SELECT @TotalCount = @RecorderCount
END
IF @PageIndex > CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
SET @PageIndex = CEILING((@TotalCount+0.0)/@PageSize)
END
IF @PageIndex = 1 OR @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
IF @PageIndex = 1 --返回第一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order1
END
IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize) --返回最后一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(ABS(@PageSize*@PageIndex-@TotalCount-@PageSize))
+ ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1
END
END
ELSE
BEGIN
IF @SortType = 1 --仅主键正序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order1 +' ) AS TMP) '+ @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 2 --仅主键反序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+' FROM '+ @TableName
+ @new_where1 + @new_order1 + ') AS TMP) '+ @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 3 --多列排序,必须包含主键,且放置最后,否则不处理
BEGIN
IF CHARINDEX(',' + @PrimaryKey + ' ',',' + @Order) = 0
BEGIN PRINT('ERR_02') RETURN END
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2 --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP '
+ @new_order2 + ' ) AS TMP ' + @new_order1
END
ELSE --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@TotalCount-@PageSize *@PageIndex+@PageSize) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1 + ' ) AS TMP ' + @new_order1
END
END
END
EXEC(@Sql)
GO

如何用vc#调用上面的存储过程

当前1/2页 12下一页阅读全文

(0)

相关推荐

  • sqlserver 通用存储过程分页代码(附使用ROW_NUMBER()和不使用ROW_NUMBER()两种情况性能分析)

    表结构: 复制代码 代码如下: CREATE TABLE [dbo].[Xtest]( [ID] [bigint] IDENTITY(1,1) NOT NULL, [XName] [nvarchar](50) NULL, [XDemo] [nvarchar](500) NULL, CONSTRAINT [PK_xtest] PRIMARY KEY CLUSTERED ( [ID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF,

  • sqlserver2005利用临时表和@@RowCount提高分页查询存储过程性能示例分享

    最近发现现有框架的通用查询存储过程的性能慢,于是仔细研究了下代码: 复制代码 代码如下: Alter PROCEDURE [dbo].[AreaSelect]    @PageSize int=0,    @CurrentPage int=1,    @Identifier int=NULL,    @ParentId int=NULL,    @AreaLevel int=NULL,    @Children int=NULL,    @AreaName nvarchar(50)=NULL, 

  • sqlserver关于分页存储过程的优化【让数据库按我们的意思执行查询计划】

    复制代码 代码如下: --代码一DECLARE @cc INT SELECT NewsId,ROW_NUMBER() OVER(ORDER BY SortNum DESC) AS RowIndex INTO #tb FROM news WITH(NOLOCK) WHERE NewsTypeId=@NewsTypeId AND IsShow=1 SET @cc = @@ROWCOUNT SELECT n.* FROM news AS n WITH(NOLOCK), #tb As t WHERE t

  • sqlserver 千万数量级分页存储过程代码

    复制代码 代码如下: set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go Create PROCEDURE [dbo].[SP_Pagination] /**//* *************************************************************** ** 千万数量级分页存储过程 ** *************************************************************** 参

  • sqlserver 存储过程分页(按多条件排序)

    cs页面调用代码: 复制代码 代码如下: public int TotalPage = 0; public int PageCurrent = 1; public int PageSize = 25; public int RowsCount = 0; string userid, username; public DataTable dt = new DataTable(); public string path, userwelcome; public string opt,cid; pro

  • 分页 SQLServer存储过程

    /*--用存储过程实现的分页程序 显示指定表.视图.查询结果的第X页 对于表中主键或标识列的情况,直接从原表取数查询,其它情况使用临时表的方法 如果视图或查询结果中有主键,不推荐此方法 --邹建 2003.09--*/ /*--调用示例 exec p_show '地区资料' exec p_show '地区资料',5,3,'地区编号,地区名称,助记码','地区编号' --*/ /* 因为要顾及通用性,所以对带排序的查询语句有一定要求.如果先排序,再出结果.就是: exec p_show 'sele

  • SQLSERVER Pager store procedure分页存储过程

    复制代码 代码如下: SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE PROCEDURE [dbo].[Pagination] @Page int = 1, -- 当前页码 @PageSize int = 10, -- 每页记录条数(页面大小) @Table nvarchar(500), -- 表名或视图名,甚至可以是嵌套SQL:(Select * From Tab Where ID>1000) Tab @Field nvarcha

  • 分页存储过程(三)在sqlserver中打造更加准确的分页结果

    有人提出游标不好,会锁定行,幸亏我锁定的是临时表,不是数据表,不影响数据表的写操作. 下面是14楼的回复,让我茅塞顿开,于是有了今天的改进版,取消了游标的使用,临时表还是存在的,谢谢. 其实你只要分成两次查询即可: 1, 还是用Row_Number查主表分页 2, Row_Number查主表分页 inner join 明细表..用不到游标的. 复制代码 代码如下: --不用游标的分页 --先将分页的主表放在临时表中,然后用临时表和子表联合查询,来获取子表信息 --既保证了分页的正确性,也包括了子

  • sqlserver 通用分页存储过程

    复制代码 代码如下: create proc commonPagination @columns varchar(500), --要显示的列名,用逗号隔开 @tableName varchar(100), --要查询的表名 @orderColumnName varchar(100), --排序的列名 @order varchar(50), --排序的方式,升序为asc,降序为 desc @where varchar(100), --where 条件,如果不带查询条件,请用 1=1 @pageIn

  • SQLServer存储过程实现单条件分页

    话不多说,请看代码: SQLServer Procedure Pagination_basic: ALTER PROCEDURE [qiancheng].[Pagination_basic] ( @Table_name VARCHAR (255), --name of table @Rows_target VARCHAR (1000) = '*', --search rows @Rows_condition VARCHAR (1000) = '', --the condition to find

随机推荐